HP 34970A MEASureRESistance? MEASureFRESistance?, MEASureCURRentDC? MEASureCURRentAC?, Xvy v yzz

Chapter 5 Remote Interface Reference

The MEASure? and CONFigure Commands

MEASure:RESistance?
MEASure:FRESistance?
[{<”z	>AUTOMINMAXDEF}
[,<	>MINMAXDEF}],] (@<				>)
Configure the specified channels for 2-wire or 4-wire measurements and
immediately sweep through the scan list one time. bz vv
v yz“z xv		. The readings are sent directly to the output
buffer but the readings vz			stored in reading memory.
For 4-wire measurements (FRES), the instrument automatically pairs
channel	with channel 87		(34901A) or D (34902A) to provide the
source and sense connections. For example, make the xz						connections
to the HI and LO terminals on channel 2 and the z					connections to
the HI and LO terminals on channel 12. Specify the paired channel in
the lower bank (source) as the vt				channel.
MEASure:CURRent:DC?
MEASure:CURRent:AC?
[{<”z	>AUTOMINMAXDEF}
[,<	>MINMAXDEF}],] (@<				>)
F Pz vz vz vzy		xv 98 vy 99					5
Ud :>E78N zz z5
Configure the specified channels for dc or ac current measurements and
immediately sweep through the scan list one time. bz vv
v yz“z xv		. The readings are sent directly to the
instrument’s output buffer but the readings vz					stored in reading
memory. For ac measurements, the resolution is actually fixed at
61⁄2 digits; the		parameter only affects the number of digits
shown on the front-panel.
MEASure:FREQuency?
MEASure:PERiod?
[{<”z	>AUTOMINMAXDEF}
[,<	>MINMAXDEF}],] (@<				>)
Configure the specified channels for frequency or period measurements
and immediately sweep through the scan list one time. bz v
xvy v yz“z xv			. The readings are sent directly to
the instrument’s output buffer but the readings vz					stored
in reading memory. With no signal applied, “0” is returned.

209