HP 34970A manual Preset state. h xy zz zzxPRESET z fxz5, Wai

Chapter 5 Remote Interface Reference

Service-Related Commands

*RST

Reset the instrument to the Factory configuration. See “Factory Reset State” on page 160 in chapter 4 for a complete listing of the instrument’s Factory Reset state. h x z x”

FACTORY RESET “z “4fxz5

SYSTem:PRESet

Preset the instrument to a known configuration. See “Instrument Preset State” on page 161 in chapter 4 for a complete listing of the instrument’s

preset state. h xy zz zzx”PRESET “ z “fxz5

SYSTem:CPON {100200300ALL}

Reset the module in the specified slot to its power-on state (CPON means “card power on”). To reset all three slots, specify ALL.

SYSTem:VERSion?
Query the instrument to determine the present SCPI version. Returns a
string in the form “YYYY.V”, where “YYYY” represents the year of the			5
version, and “V” represents a version number for that year (e.g., 1994.0).
*TST?
Perform a complete self-test of the instrument. Returns “0” if the
self-test is successful, or “1” if the test fails.
*WAI
Wait until the completion of the current scan to process any further
commands. To abort the scan, send a Device Clear command. Note that
this command will wait until the zz		scan is complete (may hang
indefinitely if a continuous scan is in progress).
*OPC
Set the “Operation Complete” bit (bit 0) in the Standard Event register
at the completion of the current scan. Note that this command will wait
until the zz	scan is complete (may hang indefinitely if a continuous

scan is in progress).

295