HP 34970A 2Select the baud rate, 1 Select the RS-232interface, 4Select the flow control method, 5 Save the changes and exit the menu

Chapter 2 Front-Panel Overview

To Configure the Remote Interface

Interface

RS-232 Configuration

1 Select the RS-232 interface.

56￿￿￿￿

2

Interface

2Select the baud rate.

Select one of the following: 1200, 2400, 4800, 9600, 19200, 38400, 57600 (factory setting), or 115200 baud.

Interface

Interface

￿￿￿￿￿￿%$8'

3Select the parity and number of data bits.

Select one of the following: None (8 data bits, factory setting), Even (7 data bits), or Odd (7 data bits). When you set the parity, you are also indirectly setting the number of data bits.

(9(1,￿￿￿%,76

4Select the flow control method.

Select one of the following: None (no flow control), RTS/CTS, DTR/DSR, XON/XOFF (factory setting), or Modem.

)/2:￿'75￿'65

5 Save the changes and exit the menu.

Interface

47