HP 34970A manual Instrument Preset State

Chapter 4 Features and Functions

Instrument Preset State

Instrument Preset State

The table below shows the state of the instrument after a PRESET from

the f menu or SYSTem:PRESet command from the remote interface.

Measurement Configuration	Preset State
Function	No Change
Range	No Change
Resolution	No Change
Advanced Settings	No Change
Totalizer Reset Mode	Count Not Reset When Read
Totalizer Edge Detect	No Change

Scanning Operations	Preset State
Scan List	No Change
Reading Memory	All Readings are Cleared
Min, Max, and Average	All Statistical Data is Cleared
Scan Interval Source	No Change
Scan Interval	No Change
Scan Count	No Change
Scan Reading Format	No Change
Monitor in Progress	Stopped

Mx+B Scaling	Preset State
Gain Factor (“M”)	No Change
Scale Factor (“B”)	No Change
Scale Label	No Change

Alarm Limits	Preset State
Alarm Queue	No Change
Alarm State	No Change
HI and LO Alarm Limits	No Change
Alarm Output Configuration	No Change
Alarm Output State	Output Lines are Cleared
Alarm Output Slope	No Change

Module Hardware	Preset State
HP 34901A, 34902A, 34908A	Reset: All Channels Open
HP 34903A, 34904A	Reset: All Channels Open
HP 34905A, 34906A	Reset: Channels s11 and s21 Selected
HP 34907A	Reset: Both DIO Ports = Input, Count = 0,
	Both DACs = 0 Vdc
System-Related Operations	Preset State
Display State	On
Error Queue	Errors Not Cleared
Stored States	No Change

4

161