58 en Configuration Using a Web Browser | VideoJet X20 |
|
|
Recording includes
You can specify whether, in addition to video data, audio data and metadata (for example alarms, VCA data and serial data) should also be recorded. Including metadata could make subsequent searches of recordings easier but it requires additional memory capacity.
| ! | CAUTION! |
| Without metadata, it is not possible to include video content analysis in recordings. | |
|
| |
|
|
|
5.24 |
| Advanced Mode: Retention Time |
You can specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten if the retention time entered here has expired.
NOTICE!
i | Make sure that the retention time corresponds with the available memory capacity. A rule of |
| |
| thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for |
| complete frame rate and high image quality. |
|
|
Retention time Camera 1 / Retention time Camera 2
Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |
