98 en | Operation VideoJet X20
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
6.3 Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process (see Section Allow snapshots, page 45).
You can save snapshots from either of the two cameras in Dual Video view. The icons below
the camera images apply to the left or right camera image, according to their layout.
XClick the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage
location depends on the configuration of the VideoJet X20 (see Section Path for JPEG
and MPEG files, page 45).
6.4 Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process (see Section Allow local recording, page 45).
You can save video sequences from either of the two cameras in the Dual Video view. The
icons below the camera images apply to the left or right camera image, according to their
layout.
1. Click the icon to start recording. The storage location depends on the configuration of
the VideoJet X20 (see Section Path for JPEG and MPEG files, page45). A red dot in the
icon indicates that recording is in progress.
2. Click the icon again to stop recording.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 48).
i
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery,
page 11).