VideoJet X20 | Appendix en 113 |
|
|
8.4LEDs
The VideoJet X20 network video server has a number of LEDs on its front and rear panels that show the operating status and can give indications of possible malfunctions:
Power On LED |
|
Does not light up: | VideoJet X20 is switched off. |
Lights up green: | VideoJet X20 is switched on. |
SFP LED |
|
Does not light up: | No connection. |
Lights up yellow: | Connection established. |
Flashes yellow: | Data being transmitted. |
ETH 1 LED |
|
Does not light up: | No network connection. |
Lights up yellow: | Network connection established. |
Flashes yellow: | Data being transmitted over the network. |
ETH 2 LED |
|
Does not light up: | No network connection. |
Lights up yellow: | Network connection established. |
Flashes yellow: | Data being transmitted over the network. |
Connect LED |
|
Lights up red: | Startup in progress. |
Lights up green: | Startup complete, VideoJet X20 is operational. |
Flashes green: | Video connection established. |
Flashes red: | VideoJet X20 is faulty, for example following failed |
| firmware upload. |
HDD LED |
|
Does not light up: | No hard drive fitted. |
Lights up orange: | Hard drive fitted. |
Flashes orange: | Hard drive activity. |
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |
