Bosch Power Tools 24618BL Assembly, Operating Instructions, Chuck, Bit Holder Screwdriver Bit

BM 2610027761 08-12_BM 2610027761 08-12.qxp 8/17/12 1:54 PM Page 10

Assembly

Disconnect battery pack ! WARNING from tool before making

any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

INSERTING AND REMOVING

ACCESSORIES

(Model 25618 only)

!WARNING To avoid loss of control, ensure bit is locked in chuck

by pulling on bit after it has been inserted.

The chuck accepts only standard 1/4" hexagonal shank accessories with power groove.

Your tool is equipped with a quick release chuck. To insert an accessory, simply pull locking sleeve forward, insert desired accessory into chuck and release locking sleeve (Fig. 2).

To remove an accessory, pull locking sleeve forward and simply remove it from the chuck.

FIG. 2 LOCKING SLEEVE

CHUCK

SCREWDRIVER

BIT

BIT HOLDER

SCREWDRIVER BIT

INSERTING AND REMOVING

ACCESSORIES

(Models 24618, & IWH181 only)

Attach only high quality accessories with the proper size square drive designed for use with impact wrenches.

(Model 24618)

Your impact wrench is equipped with a 1/2" square drive.

(Model IWH181)

Your impact wrench is equipped with a 3/8" square drive.

To install a socket, simply push completely onto output drive. To remove, pull off output drive (Fig. 3).

FIG. 3

SOCKET

OUTPUT

DRIVE

Operating Instructions

INTENDED USE

This tool is intended for the fastening and loosening of bolts, nuts and various threaded fasteners. This tool is not intended for use as a drill.

VARIABLE SPEED CONTROLLED

TRIGGER SWITCH

Your tool is equipped with a variable speed trigger switch. The tool can be turned "ON" or "OFF" by squeezing or releasing the trigger.

The speed can be adjusted from the minimum to maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed (Fig. 1).

BRAKE

When the trigger switch is released it activates the brake to stop the chuck quickly. This is especially useful in the repetitive driving and removal of screws.

-10-