Bose AM267565 manual Speaker held in place by wall stops

Steps to Installing

Figure 27

Partially inserting the rectangular-faced or round- faced speaker

1.Use both hands to support the speaker and angle it slightly, so it is diagonal to the hole. This allows clearance for the wall stops.

2.Insert the bottom of the enclosure through the hole and down part of the way – or up, depending on your clearance issues (Figure 27).

Dogleg clamps	Wall stop
Dogleg clamps

Wall stop

3.Leave the speaker in this partially inserted position, resting on the wall stops that prevent it from falling out (Figure 28). This allows ready access to the connection terminals on the upper left-hand side of the speaker.

For ceiling installations, you may feel more secure holding the speaker while making the connections.

Figure 28

Speaker held in place by wall stops

Wall stop

AM267565_01_V.pdf May 13, 2003 25