5.0 Using FreeSpace® Installer™ Software
5.5 Set Up Schedule mode
The Set Up Schedule mode allows you to automate a system by creating up to 64 events. To select the Set Up Schedule mode, click the Schedule button under Set Up System. The features and controls of the Set Up Schedule window are as follows:
Event list selection tabs – These tabs determine which list of events is displayed. Click the top tab to display the system event list. Click any one of the ZONE tabs to display the event list for a selected zone.
Event list – This list contains all scheduled events for the selected system or zone. Each event entry includes the time of the event, a description of the event, and the days of the week on which the event will occur.
Add event buttons – The Add Event buttons include On/Off, Mute, Volume, Source, and Auto Volume. The On/Off button is a system event only. Mute, Volume, Source, and Auto Volume are zone events. When you click one of these buttons, the event is added to the list and the controls for the selected event are dis- played in the Event control panel. As events occur, the number of remaining events are displayed in parentheses above the On/Off button.
Control pane – When you select an event in the event list, this pane displays the settings for that event. Any changes made to these settings are reflected in the event listing.
Remove Event button – This button will remove a selected event from the event list.
Hardware clock display – The clock display shows the current date and time of the hardware clock. The Set Clock button is used to set or change the clock.
System overview pane – This pane displays the selected hard- ware device that you are automating. For more information on the system overview pane, see “The Installer™ software user inter- face” on page 37.
Event list
Event list selection tabs
Add event buttons
Hardware clock display
Remove event button
System overview pane | Event counter | Control pane |
40 of 80
