6.0 E4 System Setup
5.Click Continue. Your Auto Volume Tracking settings are con- firmed. If the tracking settings are not correct, click the Can- cel button, change the settings, and start the setup process again.
6.Click Continue. All sources assigned to the zone are listed in the window. You are asked to confirm that a source is con- nected and operating. If the source list is wrong, click the Cancel button, use the Source Assign control panel to cor- rect the problem and start the process again.
7.Click Continue to begin the source calibration setup steps. Wait for the setup steps to be completed.
Programmer’s Note: If you attempt to calibrate a source that is already calibrated, the dialog box will tell you that source calibration is being skipped.
When the setup steps are done, you are asked to make vol- ume adjustments. The maximum output gain should always be greater than