5.0 Using FreeSpace® Installer™ Software
Adds a zone Source Change event
This event allows you to change the source at a specified time on selected days of the week.
Adds a zone Auto Volume event
This event allows you to turn Auto Volume on or off at a specified time on selected days of the week.
Programmer’s Note: Do not schedule an Auto Volume event on a zone that is not set up for Auto Volume.
Programmer’s Note: Events are only saved to the E4
unit when you click the 
(Flash Hardware Configu- ration) button.
5.5.3Viewing and changing event settings
To view any event and change the settings, first click the system or one of the zone tabs. Then select an event in the list to display the event settings in the control pane. Now, you can edit the set- tings just as when an event is added.
5.5.4 Removing events from the list
To remove an event from the list, select the event by clicking on it
and then click the 
(Remove Event) button.
Programmer’s Note: After changing any event settings or removing an event from the list, you must flash the hardware in order for the change to take effect.
42 of 80
