5.0 Using FreeSpace® Installer™ Software
5.4 Set Up Hardware mode
Using the Set Up Hardware mode, you can create new system configurations. The following example displays the software front panel for the FreeSpace® E4 Series II system.
The hardware setup window consists of three panes:
System overview pane – This pane displays the selected hard- ware device that you are currently configuring. For more informa- tion on the system overview pane, see “The Installer™ software user interface” on page 37.
Hardware pane
Hardware pane – The hardware pane displays a software front panel of the hardware device that you selected in the system overview pane. Reading from left to right, this diagram shows you the functions and signal paths from input sources to output zones. All functions internal to the connected hardware device appear on a gray background.
Functions are selected by clicking on a button. When you select a function, all controls for that function appear in the control pane.
Control pane – When you select a function in the hardware pane, the controls that affect operation, configuration, or setup of the selected function or device appear in the control pane. On some control panes, you can view additional functions by clicking on More.
Selected function
Connected | System overview pane | Control pane for |
hardware |
| selected function |
39 of 80