Lexmark PRO910 manual Using memory cards and flash drives, Supported memory cards and file types

About your printer

Tips:

•Use your fingers to navigate the screen. The touch screen does not work if you use other tools or devices to navigate.

•Drag the scroll bar or touch the arrows until the menu or setting that you want appears on the display.

•Flick the screen by dragging your finger up or down the screen, and then lifting your finger off the screen. To navigate to the next or previous screen, flick sideways. It will have the same effect as selecting the left or right arrow.

•To confirm a setting or select a menu or item, touch it.

•If necessary, touch OK or Accept after making a selection or changing a setting.

Note: All the instructions in this guide start from the home screen. If you are not on the home screen,

then touch .

For example, to navigate to Paper Type and select the default paper type setting:

1Touch > Paper Setup > Paper Type.

Note: For select printer models with two paper trays installed, touch > Paper Setup, select the paper tray, and then touch Paper Type.

2Scroll up or down (using the scroll bar or arrows, or by flicking the screen up or down) to view the list of paper types.

3Select a paper type setting by touching it, and then touch Accept to save the setting.

Using memory cards and flash drives

Supported memory cards and file types

Memory card		File type
•	Secure Digital (SD)	Documents:
•	Secure Digital High Capacity (SDHC)	• .pdf (Adobe Portable Document Format)
•	Micro Secure Digital (with adapter) (Micro SD)	Images:
•	Mini Secure Digital (with adapter) (Mini SD)	• .jpg, .jpeg, .jpe (Joint Photographic Experts
•	MultiMedia Card (MMC)	Group)
		• .tiff, .tif (Tagged Image File Format)
•	Reduced Size MultiMedia Card (with adapter)
	(RS‑MMC)
• MultiMedia Card mobile (with adapter)
	(MMCmobile)
•	Memory Stick Duo
• Memory Stick PRO Duo

15

Using a memory card or flash drive with the printer

Insert a memory card into the card slot or a flash drive into the USB port

Inserting a memory card Inserting a flash drive

SD/MS- Duo/MMC SD/MS- Duo/MMC

E

DRIV

FLASH

Notes:		Notes:
•	Insert the card with the brand name label facing	•	The flash drive uses the same port that is used
	up.		for a PictBridge camera cable.
•	Make sure any arrows on the card point toward	•	An adapter may be necessary if your flash
	the printer.		drive does not fit directly into the port.

•If necessary, connect the memory card to the adapter that came with it.

•Make sure that the memory card inserted is supported by the printer. For more information, see “Supported memory cards and file types” on page 15.

•The card reader light comes on when a memory card is inserted and blinks when a memory card is being accessed.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

SD/MS-Duo/MMC

E

DRIV

FLASH