Lexmark PRO910 manual Use, Scanner unit

About your printer

9 1

2

10 11

12

13

15

EXT

LINE

8

				SD/MS-
				Duo/MMC
	7
				3
		6	5	4
	Use the	To
1	Automatic Document Feeder	Load original documents into the ADF for scanning, copying, or faxing.
	(ADF) tray	Note: Do not load postcards, photos, small items, or thin media
		(such as magazine clippings) into the ADF. Place these items on the
		scanner glass.
2	ADF output tray	Hold documents as they exit from the ADF.
3	Memory card slot	Insert a memory card.
4	PictBridge and USB port	Connect a PictBridge-enabled digital camera or a flash drive to the
		printer.
5	Paper exit tray	Hold paper as it exits.
6	Paper tray (Tray 1)	Load paper.
7	Paper stop	Catch the paper as it exits.
8	Printer control panel	Operate the printer.
9	ADF	Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size
		documents.

12

19		18	16
			17
	Use the	To
10 Scanner unit		• Access the ink cartridges and printhead.

•Remove paper jams.

11	Ink cartridge access area	Install, replace, or remove ink cartridges.
12	Ethernet port	Connect your printer to a computer, a local network, an external DSL, or
		a cable modem.
13	USB port	Connect the printer to a computer using a USB cable.
		Warning—Potential Damage: Do not touch the USB port except when
		plugging in or removing a USB cable or installation cable.
14	EXT port	Connect additional devices (telephone or answering machine) to the
		printer and the telephone line. Use this port if you do not have a dedicated
		fax line for the printer, and if this connection method is supported in your
		country or region.
		Note: Remove the plug to access the port.
15	LINE port	Connect the printer to an active telephone line (through a standard wall
		jack, DSL filter, or VoIP adapter) to send and receive faxes.

16	Power supply with port	Connect the printer to a power source.
17	Duplex unit	•	Print on both sides of a sheet of paper.
		•	Remove paper jams.