![](/images/new-backgrounds/1169774/16977435x1.webp)
Ordering and replacing supplies | 18 |
3Press the release tab, and then remove the used ink cartridge or cartridges.
Installing ink cartridges
1Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge. If your ink cartridge comes with a twist cap, then remove the cap.
2Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.
Notes:
•Insert the color cartridges first, and then the black cartridge.
•Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.
3Close the printer.
Maintaining ink cartridges
In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every week if it is plugged into an electrical outlet. It will briefly come out of Sleep mode or will temporarily power on if it is turned off.
Aligning the printhead
If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead.
1Load plain paper.
2From the home screen, navigate to:
![](/images/new-backgrounds/1169774/16977435xi2.webp)
> More Options > Align Printer
An alignment page prints.
Note: Do not remove the alignment page until printing is finished.