Bose RC-18S manual Additional legacy product rules

Code Switch Setting

•If the remote will be used with older non-Bose®link products:

•with Bose legacy speakers or systems (purchased before 2004), only the remote needs a room code setting. Set it as Room 0.

•with a LIFESTYLE® stereo amplifier (SA-1) the RC-18S must be set to Room B so it matches the amplifier room setting.

Additional legacy product rules

With a few special settings, and operational limitations, legacy Bose (and other brand) products can work with your LIFESTYLE® 18 Series II or 28 Series II DVD home entertainment system. They may pre-date the Bose® link system of multi-room expansion, but older speakers and systems can still benefit from its flexibility for renewed performance.

Please note the special rules that apply below.

•To use a Bose LIFESTYLE® stereo amplifier (SA-1), which is set to receive audio stream 2:

–keep the RC-18S remote set to receive audio stream 2.

–set the Protocol option under the Media Center feature in the System menu to Legacy. Refer to your system Operation Guide for details on making System menu changes.

•To use a Bose Wave® radio, a Wave® radio/CD, Acoustimass® 5 powered speakers, or LIFESTYLE® powered speakers:

–set the RC-18S remote in that expansion room for Room O and to receive audio stream 2.

–if your expansion product includes a remote control (the Wave radio, for example) set that remote to the maximum volume you want. Then use the RC-18S remote to adjust the volume as needed.

English Dansk Deutsch Español Français Italiano Nederlands Svenska

13