Bose RC-18S How to change the settings, as needed, First check the house code setting switches

Code Switch Setting

How to change the settings, as needed

Use a fine-pointed pen or other small tool to move each switch to its new position.

First check the house code setting (switches 1-4)

Make sure that the first four switches on the left, as you face them, match the house code settings in your primary remote. For more details on these switches, refer to the Operation Guide provided with your system.

To receive the same audio stream as the main room

Switch 5, the middle switch in the row, is set

currently to receive audio stream 2, which is different from the stream heard in the main room (A).

To receive audio stream 1 instead, set switch 5 down.

To set your RC-18S remote for other room use (switches 6-9)

Before you change them, the RC-18S room switches are set for its use in Room B (as shown in the table on page 16).

If you use more than one RC-18S remote, each one must have unique room switch settings, to operate indepen- dent of the others. It must also match the room settings of any Bose® link amplifiers you will control using the RC-18S in that room.

English Dansk Deutsch Español Français Italiano Nederlands Svenska

15