Kenmore 790.75603 manual Setting Oven Lockout Feature, Instructions Press Display

Setting Oven Controls

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The _TOP_pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS PRESS DISPLAY

To activate the Oven Lockout feature

1. Press and hold _ for 3 seconds.

2.After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1).

Qfor 3

seconds

Figure 1

To reactivate normal oven operation

1.Press and hold _STOPfor 3 seconds. A beep will sound. The

"DOOR LOCKED" will flash in the display until the oven door has completely unlocked (Figure 2).

2.The wall oven is again fully operational.

Qfor 3

seconds

Figure 2

Setting	Silent	Control		Operation
The DELAYTIME		_	and FLEX CLEAN _		pads control the Silent Control operation	feature.The	Silent Control
operation	feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed				for silent operation and later returned to operating with all the normal sounds			and beeps.
			INSTRUCTIONS		PRESS	DISPLAY

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press

and hold @.	"--:--" will appear and "DELAY" will flash in the
display (Figure	3). After 7 seconds "SP" (Speaker) will appear	for 7 seconds
in the display (Figure 4).

2.Press @ to switch between normal sound operation and silent operation mode. The display will show either "SP" (Figure 4) or ":--" (Figure 5).

If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":- -" appears (Figure 5), the control is in the silent operation mode.

3. Press STARTto accept the change or press _ to reject the change.

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature reached, even if the control is set to silent operation.

Figure 3

Figure 4

Figure 5

has been

17