Kenmore 790.75603 manual Instructions, Display

Setting	Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER _	and FLEX CLEAN _	pads control the Continuous Bake or 12 Hour Energy Saving features. The oven
	v

control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features

1.	Press and hold _		for 7 seconds (Figure1). After 7 seconds "12h" or
		v
	"- -h" will appear in the display and the control will beep once.
2.	Press _	to switch between the f2 Hour Energy Saving and

v

continuous bake features. Note: "12h" (Figure 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h" indicates the control is set for the Continuous Bake feature (Figure

PRESS

for 7

seconds

@

DISPLAY

Fi 1

Figure 2

3).

START

3.Press STARTto accept the change (Figure 4; display will return to

			o,@	Figure 3
time	of day) or press Q		to reject the change.
Setting	Kitchen Timer			Figure 4
The TIMER _		pad controls	the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that

will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Kitchen Timer (example for 5 minutes)

1. Press @.	.....---- will appear and "TIMER" will flash in the display	_.)
		v
(Figure 5).

2.Press the number pads to set the desired time in the display

(example 0).	Press START.The time will begin to count down	Figure 5
		START
		v
with "5:00" and "TIMER" will stay in the display (Figure 6). Note: If
STARTiS not pressed the timer will return to the time of day after 25
seconds.		Figure 6

3.When the set time has run out, "End" and "TIMER" will show in the display (Figure 7). The clock will sound with 3 beeps every 5

seconds until _ is pressed.

Figure 7

To cancel the Kitchen Timer before the set time has run out

Press @. The display will return to the time of day.

To Set Add 1 Minute Feature

The _	ADD	1 MINUTE	pad is used to set the Add			1 Minute feature.		When the _	pad is pressed, 1 minute is
added	to the Kitchen Timer		feature	if this	feature is already active.		If the	Kitchen Timer	feature	is not active and the
pad is pressed,		the Kitchen	Timer	feature	will become	active and	will begin counting down from			1 minute.
						16