Setting Surface Controls
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use, These items could melt or ignite. Potholders, towels or wood spoons could catch fire if placed too close to a flame.
In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then rapidly turn the surface control knob to Med. After burner lights turn knob to desired setting. Use caution when lighting surface burners manually.
Lo
Operating the Gas Surface Controls:
1.Place cooking utensil on surface burner.
2.Push the surface control knob down and turn counterclockwise out of the OFF position (See Figure 1).
3.Release the knob and rotate to the LITE position. Note: All five electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite.
4.Visually check that the burner has a flame.
5.Turn the control knob counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the knob indicator settings to adjust the flame as needed. DO NOT cook with the surface control knob in the LITE position. (The electronic ignitor will continue to spark if the knob is left in the LITE position.)
Setting Proper Surface Burner Flame Size
For most cooking, start on the highest control setting and then turn to a lower one to complete the process. Use the recommendations below as a guide for determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will
L/TE
3
4
5
6
influence the setting needed for cooking.
*Flame Size | Type of Cooking |
|
|
| il ii! |
High Flame | Start most foods; bring water to a boil; pan broiling. | .... |
Medium Flame | Maintain a slow boil; thicken sauces, gravies; steaming. |
|
Low Flame | Keep foods cooking; poach; stewing. |
|
*These settings are based on using
Figure 1
Proper flame size
Improper flame size
Figure 2
of pans. The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a
Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.
Never extend the flame beyond the outer edge of the utensil. A higher flame wastes heat and energy and increases your risk of being burned by the flame (Figure 2).
For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown quickly and the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly.
11
