Using the System

Playing music with the SoundTouchcontroller

During the app set up process, the SoundTouchcontroller was activated and a wireless connection was established. You can use the SoundTouchcontroller to play and manage your presets.

Note: The SoundTouchcontroller must be within 70 feet (21 m) of the SoundTouchwireless adapter in wood-construction homes.

In concrete, stucco or brick homes, the range will likely be less and may vary. The number of other active wireless devices in the home may affect range. Ideally, there should be no more than one wall or ceiling between the controller and the wireless adapter.

SoundTouchicon

Presets ring

Skip backward

Skip forward

Screen

Volume ring

Using the SoundTouchcontroller

Press a preset to play it. Press and hold a preset to personalize it.

Move your finger around the Presets ring to view presets.

Turn the Volume ring to adjust the volume.

Touch or to skip through content.

Press and hold the screen to turn the SoundTouchsystem on and off.

Press the screen to play or pause music.

Touch and hold the SoundTouchicon to disconnect the controller from a system. To connect to another system, refer to the help system in the app.

Note: If the controller is in power saving mode, wave your hand within 6 in. (15 cm) above the screen to turn it on.

English - 17

Page 17
Image 17
Bose SA-4 manual Playing music with the SoundTouch controller, Using the SoundTouch controller