Appendices

Appendix B: Wall mounting the

SoundTouch™ SA-4 amplifier

Vertical

Horizontal

orientation

orientation

Connector

Connector panel

panel is

is facing up.

facing left.

 

Follow these instructions to wall mount your SoundTouchTM SA-4 amplifier. Install either vertically with the connector panel facing left, or horizontally ­ with the connector panel facing up.

1.Remove rubber feet from the SA-4 amplifier. Use these holes to mount the amplifier on the wall.

2.To mark mounting hole locations, hold the SA-4 amplifier in position and mark the wall through the holes in the housing.

3.Drill holes.

4.Insert and tighten screws (and anchors, if used).

30 - English

Page 30
Image 30
Bose manual Appendix B Wall mounting SoundTouch SA-4 amplifier