Bose SA-4 manual Appendix C Wall mounting SoundTouch wireless adapter, Wallboard

Appendices

Appendix C: Wall mounting the

SoundTouch™ wireless adapter

Vertical	Horizontal
orientation	orientation
Connector	Connector panel
panel is	is facing up.
facing left.

Follow these instructions to wall mount your SoundTouch™ wireless adapter. Install either vertically with the connector panel facing left, or horizontally with the con- nector panel facing up.

Note: Mounting hardware must be purchased separately. If the mounting hardware instructions differ from these instructions, follow the mounting hardware instructions.

•Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with a ⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws.

•Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill pilot hole with a ³/16 in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.

Wood

¼in. (6.35 mm) above surface

Wallboard

¼in. (6.35 mm) above surface

1.Mark holes on the wall 6¼ in. (158.7 mm) center-to-center.

2.Drill holes. Insert anchors (if used).

3.Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.

4.Position SoundTouch™ wireless adapter onto screws. Press firmly into place.

32 - English