Using the System

Wall mounting the SoundTouchcontroller

WARNING: The wall mount bracket contains magnetic material. Please contact your physician if you have any questions whether this might affect the operation of your implantable medical device.

Follow these instructions to wall mount your SoundTouchcontroller. Use the bracket as a template to mark the holes.

Tab

Bracket

Wallboard (anchors and screws supplied):

1.Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.5 mm) or thicker wallboard.

2.Insert the provided anchors into the holes and tap lightly to secure.

3.Align the bracket (tab at top) to the anchors. Tighten the provided screws into the holes.

4.Align the latch to the bracket's tab. Attach the controller.

Wood:

1.Purchase two #6x1 in. (25.4 mm) flat-head wood screws.

2.Use a 7/64 in. (2.78 mm) drill bit to drill 2 holes into ³/4 in. (19 mm) or thicker wood.

3.Align the bracket (tab at top) to the holes. Tighten the screws into the holes.

4.Align the latch to the bracket's tab. Attach the controller.

18 - English

Page 18
Image 18
Bose SA-4 manual Wall mounting the SoundTouch controller, Wallboard anchors and screws supplied