Bluetooth Operations
2.Once the phone number has been entered
completely, tap 
button to start dialing the call, and the below display will show on
the TFT:
3.User can use the Encoder Volume Knob to adjust the volume level.
4. Tap 
button on display to end the conversation. The unit will switch back to the previous mode automatically. The mute of the previous mode will be released at the same time.
5.During talking mode, if the Ignition is being turned off, the unit will keep the conversation even if the ignition is switched
off. After the conversation, User can tap 
button to switch off the unit.
NOTE
After the tapped 
button, the present mode will be muted at
the same time, user can press the 
button to release the Mute.
When making an outgoing call, it's not possible to CALL TRANSFER if the call is not being answered yet. It's only possible to Transfer the call to Mobile Phone after the call is being answered.
Depending on different type of Mobile Phone, the time need for activating the CALL TRANSFER mode is different. Example Nokia Mobile Phone usually takes
tapping 
button for audio transfer back or forth from Unit to Mobile Phone.
CALL TRANSFER
To Audio Transfer From Head Unit Back To The Mobile Phone
During the talking mode, user can tap the 
button to transfer the audio from the unit back to the Mobile Phone for privacy reason. The below display will be show on TFT for 3 seconds:
AUTO ANSWER
Auto Answer Mode
User can set this unit to automatically answer all
the incoming calls, once this function is set to
on, user do not need to tap the
button to answer / accept any incoming call.
NOTE
Please refer to the SETUP MENU Operation for more details of how to access into and operates the SETUP MENU of BLUETOOTH _Auto Answer.
E - 28
