AV-In Mode

Select the AV Mode

You can connect up to 2 optional devices, tap button on display to enter into the AV mode.

AV - 1 = Front panel AV in AV - 2 = RCA back of unit

AV -1

This unit is allowed to connect with external Audio/Video system such like Digital Camera or Game Console. User can connect the external A/V system thru the A/V in jack on front panel.

AV-2

Connect the external signal to the RCA line in jack located at the rear of the unit , then press

button to select AV -2.

TIPS

The below “ No Video Signal ” will show on the TFT as remind if there is no any external AV System input.

About the Parking Wire

CAUTION

In order to avoid any accident, the driver must not watch video while driving. This unit is designed to not allow watching video while driving. Park your car in a safe place and engage the parking brake before watching video.

NOTE

The Video Blocking system under Parking Brake NOT ENGAGED only control this unit's display, This system will not affect the Video Output thru the rear RCA Video Output.

Tips

Be sure to connect Parking Brake connection lead. ( please see more details on “ Wiring Diagram.”)

NOTE

If watch moving video from Disc or AV In source but Parking Brake is N OT

PROPERLY CONNECTED, the video signal

will be blocked by the system and the below display will be show on TFT:

Info

About The Reverse Wire For

Back Up Camera System

If user connected a back up camera system to this unit, the vehicle is in reverse Gear (Back Up mode), the front in-dash TFT display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in- dash TFT.

Tips

Be sure to connect Reverse wire properly. (please see more details on “ Wiring Diagram.”)

E - 22

Page 22
Image 22
Boss Audio Systems BV9355B manual AV-In Mode, About the Parking Wire, Select the AV Mode, AV-2