26

SYSTEM

OUTPUT SELECT

Specify the device (amp) that’s connected to the OUTPUT jacks.

Parameter Value Explanation
SELECT
JC-120
Choose this setting if the GT-100 is connected
to the guitar input of a Roland JC-120 guitar
amp.
SMALL AMP Choose this setting if the GT-100 is connected
to a small guitar amp.
COMBO AMP
Choose this setting if the GT-100 is connected
to the guitar input of a combo-type guitar
amp (i.e., a single unit that contains the amp
and speaker) other than the JC-120.
For some types of guitar amps, the “JC-120”
setting might produce better results.
STACK AMP
Choose this setting if the GT-100 is connected
to the guitar input of a stack-type guitar amp
(i.e., one in which the amp and speaker are
separate units).
JC-120 RETURN Choose this setting if the GT-100 is connected
to the RETURN jack of the JC-120.
COMBO RETURN
Choose this setting if the GT-100 is connected
to the RETURN jack of a combo-type guitar
amp.
STACK RETURN
Choose this setting if the GT-100 is connected
to the RETURN jack of a stack-type guitar
amp. You should also choose the “STACK
RETURN” setting if you’re using a guitar
power amp together with a speaker cabinet.
LINE/PHONES
Choose this setting if you’re using
headphones, or if the GT-100 is connected to
a keyboard amp, mixer, or digital recorder.

INPUT

Adjust the input level according to the output level of the guitar that

you’ve connected.

Parameter Value Explanation
INPUT LEVEL -20–+20 dB Adjusts the guitar input level.

GLOBAL EQ

This adjusts the tone of the OUTPUT regardless of the equalizer on/o

settings of individual patches.

Parameter Value Explanation
LOW GAIN -20–+20 dB Adjusts the low frequency range tone.
MID GAIN -20–+20 dB Adjusts the middle frequency range tone.
MID FREQ 20.0 Hz–10.0 kHz Species the center of the frequency range
that will be adjusted by the MID GAIN.
MID Q 0.5–16
Adjusts the width of the area aected by the
EQ centered at the MID FREQ. Higher values
will narrow the area.
HIGH GAIN -20–+20 dB Adjusts the high frequency range tone.

TOTAL

These parameters control the threshold level of the noise suppressor used

by each patch, the overall reverb level, and the overall output. They do not

aect the settings of each patch.

Parameter Value Explanation
NS THRESH -20–+20 dB
Control the threshold level of the noise
suppressor used by each patch. This does not
aect the settings of each patch.
* If you want to use the settings specied for
each patch, set this to 0 dB.
REVERB 0–200%
Adjusts the reverb level specied for each
patch.
It is useful to adjust the reverb level
appropriately for the space in which you’re
performing. This does not aect the settings
of each patch.
* If you want to use the settings specied for
each patch, set this to 100 %.
MAIN
OUTPUT
LEVEL
-10 dB, +4 dB
Species the output reference level as
appropriate for the input level of the device
connected to the OUTPUT jacks.

PHRASE LOOP

Here are various settings for the Phrase Loop function.

Parameter Value Explanation
MODE
PERFORM
The sound processed by the eects will be
recorded.
This lets you create a variety of performances
by layering dierent sounds.
PATCH EDIT
The sound before being processed by the
eects will be recorded, and the eects will
be applied when the loop is played back.
This is a convenient way to adjust the eects,
or to compare the sound of dierent patches.
REC MODE
MONO The phrase will be recorded in monaural
(maximum 38 seconds).
STEREO The phrase will be recorded in stereo
(maximum 19 seconds).
PLAY LEVEL 0–120 Species the phrase playback volume.
PEDAL FUNC
OFF Phrase Loop will not operate even if you
press the [PHRASE LOOP] pedal.
PHRASE LOOP You can use the [PHRASE LOOP] pedal to
switch Phrase Loop on/o or to record.

PLAY OPTION

Here you can specify how the pedals will work during performance.

Parameter Value Explanation
BANK
CHANGE
MODE
WAIT
Although the indication in the display is
updated to reect the change in the bank
when a BANK pedal is pressed, the patch will
not change until a number pedal has been
pressed.
IMMED The patch switches instantly when a BANK
pedal or any of the number pedals is pressed.