3
Basic Operation
Choose what you’re going to edit
Press one of the following buttons.
1
Select an item
Exit the settings
Edit the values
2
4
3
Editing on the GT-100 is extremely simple; the procedure is always the same..
Use to select an item shown in the left
display.
Press .
Use to edit the values
shown in the right display.
Eect
Here you can edit the parameters of each eect. System
Here you can make settings that apply to the
entire GT-100, such as output settings and
phrase loop settings.
EZ (Easy) Tone
Here you can create the desired tone simply by
choosing a musical style and the type of song you
have in mind. You can also customize the amp and
overdrive/distortion settings in an intuitive way.
Control/Expression
Here you can assign the desired functions to the
[ACCEL/CTL] pedal, [EXP] pedal, and external
pedals.
Turn the knobs
to edit the
values.
If page tabs are shown in the screen, you can use the
[PAGE] buttons to move between tabs.
The screen shown here is an example of when you’ve pressed the
[EFFECT] button.
You’ll be returned to the Play screen.
Turn knob [4] to select the
desired item (the cursor will
move).
page 5
page 4
page 26
page 31
NOTE
The settings you’ve edited will be lost when you switch patches. If you want to keep the edited settings, you must save them as a user patch
(Owner’s Manual: p. 13).