After several seconds of not changing the balance, the display will return to the “VOLUME...” indication. You may also return to controlling volume by again pressing the BALANCE pushbutton. The balance resolution is the same as for the volume control, 0.5 dB steps.
WARNING: If the input is programmed to be in “THEATER MODE,” then the balance control will have no effect.
For more information, see THEATER MODE in the programming section on page
MUTE
To temporarily reduce the volume, press the MUTE pushbutton. “VOLUME MUTED” will show in the display, replacing the volume indication. Again pressing the MUTE pushbutton will return the volume to normal level.
While muted, the level of both channels will be set to
OPERATION
