REMOTE CONTROL

BATTERIES

A standard small flat-blade screwdriver is required to install the three

AAAbatteries. To install batteries in the remote control, it is necessary to separate the two sections.

WARNING: When opened, the pushbutton balls will be loose and care must be taken to properly retain them.

It is recommended to lay the remote control face down on a flat surface so that the balls will stay in position. Then, remove the three screws. Lift off the cover and set aside, making certain that the battery holder comes out from the cover. Install the batteries with the positive

(+) terminals facing as indicated on the holder and replace the cover.

3-1

REMOTE

CONTROL

Page 22
Image 22
Boulder Amplifiers 865 manual Remote Control, Batteries