GETTING STARTED

INTRODUCTION

Congratulations on your selection of the Boulder 865 Integrated
Amplifier, the finest integrated amplifier in the world. We at Boulder are
certain it will provide years of listening pleasure.

QUICK START

To get started listening, you will need to connect the 865 as both an
amplifier and preamplifier. Please take note of the following.
WARNING: Because the volume control is connected optically, it
has no stops and it is tempting to spin it. DO THIS ONLY WITH THE
POWER OFF! It must be given the respect you would any other volume
control, as it has the ability to get loud very quickly. By the time you have
turned it up to -40.0 dB with a source turned on, you should be hearing
some music. If not, do not increase the volume until you have solved
this problem. See the troubleshooting section on page 7-3.
For the 865 to work properly, the Boulderlink MASTER/SLAVE
switch should be set to MASTER in most instances. See page 1-9.
A thorough reading of this manual prior to use and set up will
greatly enhance your enjoyment of the 865 Integrated Amplifier.
GETTING
STARTED
1-1