Operating
Operating |
|
|
|
Adjusting the volume | VIDEO | RGB SEARCH | STANDBY/ON |
1. Press the VOLUME button on the remote control. | MAGNIFY | HOME PAGE UP | VOLUME |
| ASPECT | AUTO | BLANK |
A dialog will appear on the screen to aid you in adjusting | ON |
|
|
the volume. |
| END PAGE DOWN | MUTE |
2. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
ENGLISH
Temporarily muting the sound
1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
VIDEO | RGB |
|
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
| END | PAGE DOWN | MUTE |
OFF |
|
|
|
FREEZEKEYSTONE
To restore the sound, press the MUTE or VOLUME button.
Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Selecting an input signal
1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its input port as below.
RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO
1. | Press the RGB button on the remote control to select an |
| |
| input port for RGB signal. |
Each time you press the button, the projector switches its | |
RGB input port as below. | |
RGB IN1 RGB IN2 | |
LAMP
TEMP
POWER
STANDBY/ONINPUT
MENU
STANDBY/ON
VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
●
When the TURN ON is selected to the the projector selects the RGB IN1 port IN1 port, projector will check the RGB
item SEARCH of OPTION menu (36), at first. If no input is detects at the RGB IN2 port.
1. | Press the VIDEO button on the remote control to select |
| |
| an input port for video signal. |
Each time you press the button, the projector switches its | |
video input port as below. | |
COMPONENT VIDEO | |
STANDBY/ON VIDEO RGB SEARCH
ASPECT | AUTO BLANK |
●
When the TURN ON is selected to the item SEARCH of OPTION menu the projector selects the COMPONENT VIDEO port at first. If no input is detected at the COMPONENT VIDEO port, projector will begin to check ports.
