BOXLIGHT CP-324i Operating the computer screen, USB mouse and keyboard control, Move pointer

Operating

Operating the computer screen

CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment.

•While using this function, please connect only with a computer.

•Before connecting, read the manuals of the computer you will connect.

NOTE • It may not be possible to control notebook PC, and other computers with built-in pointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing device. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

•The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

•The USB control can be used only for the functions listed below. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

•This function is not available while the lamp is warming up (the POWER indicator flashes green), and while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

USB mouse and keyboard control

1. Connect the projector’s USB port to the computer via the mouse cable.

Available function	Remote control operation
Move pointer	Use ▲, ▼, ◄, ► buttons
Left click with mouse	Press ENTER button
Right click with mouse	Press RESET button
Press keyboard’s HOME key	Press HOME button
Press keyboard’s END key	Press END button
Press keyboard’s PAGE UP key	Press PAGE UP button
Press keyboard’s PAGE DOWN key	Press PAGE DOWN button
Press keyboard’s ESC key	Press ESC button

ENGLISH

21