Multifunctional settings
IMAGE
Menu
With the IMAGE menu, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB] |
| :SELECT |
PICTURE | ASPECT | 4:3 |
IMAGE | OVER SCAN | 95 |
INPUT | V POSITION | 25 |
SETUP | H POSITION | 142 |
SCREEN | H PHASE | 16 |
OPTION | H SIZE | 1344 |
EASY MENU | AUTO ADJUST |
|
Item
Description
| Using the buttons ▲/▼ switches the mode for aspect ratio. | |
| At a RGB signal | |
| 4:3 16:9 NORMAL | |
| At a video signal / no signal | |
ASPECT | 4:3 16:9 SMALL | |
| ||
| • The NORMAL mode keeps the original aspect ratio of the signal. | |
| • At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT | |
| VIDEO input, this item can't be selected. | |
| • Performing the automatic adjustment initializes the aspect ratio | |
| setting. | |
| Using the buttons ▲/▼ adjusts the | |
OVER SCAN | Large (It reduces picture) Small (It magnifies picture) | |
• This item can be selected only at a video signal. | ||
| • When this adjustment is too large, certain degradation may appear | |
| at the frame area of the picture. In such a case, please adjust small. | |
V POSITION | Using the buttons ▲/▼ adjusts the vertical position. | |
Up Down | ||
| ||
H POSITION | Using the buttons ▲/▼ adjusts the horizontal position. | |
Left Right | ||
| ||
| Using the buttons ▲/▼ adjusts the horizontal phase to eliminate | |
| flicker. | |
H PHASE | Right Left | |
| • This item can be selected only at a RGB signal or a component | |
| video signal. |
28
