Components
Projector (Front and Top View)
INTRODUCTION
Focus ring 
Adjust focus.
Lens shift dial 
(Vertical) 
ENTER button 
LENS SHIFT (V)
For setting the selected items
ENTER
or adjustments from the menu.
Focus
Zoom
LENS SHIFT (H)
Zoom ring
Adjust screen display
Lens shift dial (Horizontal)
Adjustment buttons
(T,S,W,X)
Exit button |
| STATUS |
For exiting the OSD. | EXIT | MENU |
| ECO | INPUT |
ECO button |
|
|
For extended Lamp life. |
|
|
Power (ON/OFF) buttons |
|
|
For turning the power on or off.
Power indicator
Blue: The power is ready.
Blue blinking: The fan is cooling.
Ring cap cover set
Prevent foreign objects from falling into the focus/zoom ring compartment.
Air filter/cooling fan 
Adjustment foot 
For selecting menu items.
Temperature indicator
This indicator glows red, when the temperature of the projector exceeds the set critical temperature or when the fan functions abnormally.
MENU button
Press this button to enter the OSD menus.
INPUT button
Press this button to select the input source.
Intake vent
Remote control sensor
Adjustment foot
Temperature indicator
The projector has an over temperature warning LED on the control panel. If the projector overheats because of a dirty filter or another problem, the LED will flash, and the projector lamp will turn off, after which a 90- second cooling off period occurs. After restarting the projector, if the unit doesn’t operate normally, take the projector in for servicing.
9
