Toshiba 52HMX94 Using CableClear DNR digital noise reduction, Selecting the color temperature

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using CableClear™ DNR (digital noise reduction)

The CableClear™ digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing back a video cassette or disc damaged by repeated use.

NOTE: The CableClear DNR feature does not function in HDMI (DVI), ATSC, IEEE-1394, and digital Cable modes.

To turn on CableClear DNR:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the CABLECLEAR DNR field, and then press • to select AUTO.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

NOTE:

•If the current input is Antenna, Video 1, Video 2, or Video 3, the menu will display the text “CableClear.”

•If the current input is ColorStream HD1 or ColorStream HD2, the menu will display the text “DNR.”

•If the current input is HDMI or IEEE-1394, the menu will display the text “DNR” and will be “grayed out” to indicate that the feature does not function in this input.

To turn off CableClear DNR:

Select OFF in step 3 above.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures: cool, medium, and warm, as described below.

Mode Picture Quality

cool blueish medium neutral

warm reddish

To select the color temperature:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the COLOR TEMPERATURE field, and then press • to select the mode you prefer (COOL, MEDIUM, or WARM).

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

Resetting the advanced picture settings

To reset the advanced picture settings to their factory values:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Highlight RESET and press ENTER.

4.Highlight SAVE and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	77
HMX94(E)076-81(8b-UseTV)	77	9/28/04, 11:05 AM

(E) 46/52/62HM94