Toshiba 52HMX94 owner manual Using the SRS WOW surround sound feature

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Using the SRS® WOW™ surround sound feature

WOW is a special combination of SRS Labs audio technologies (SRS 3D, FOCUS™, and TruBass™) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.

To adjust the WOW settings:

1.Put the TV in STEREO mode (see “Selecting stereo/SAP broadcasts” on page 79).

2.Press MENU and open the AUDIO menu.

3.Highlight ADVANCED AUDIO SETTINGS and press

ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.Press z or y to highlight the WOW feature you want to adjust, and then press x or • to adjust the item.

• 3D — To turn the surround sound effect on or off.

Note: If the broadcast is monaural, the 3D effect does not work.

•Focus — To turn the vocal emphasis effect on or off.

•TruBass — To select the desired bass expansion level (HIGH, LOW, or OFF).

5.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To reset the WOW settings:

Highlight RESET in the Advanced Audio Settings menu and press ENTER.

________

SRS, WOW and the logo are trademarks of SRS Labs, Inc.

SRS WOW technology is incorporated under license from SRS Labs, Inc.

Using the Dolby® Virtual with SRS® TruSurround sound feature

The Dolby® Virtual with SRS TruSurround sound feature allows you to enjoy virtual surround sound from the TV’s speakers.

•For digital input sources (digital antenna/cable or IEEE- 1394) encoded with 5.1-channel sound, the Dolby Virtual with SRS TruSurround feature functions as Virtual Dolby Digital, which simulates Dolby Digital 5.1-channel, six-speaker surround sound from the TV’s speakers.

•For stereo analog input sources or sources with less than

4-channel coding, the Dolby Virtual with SRS TruSurround feature functions as Virtual Dolby Surround, which simulates Dolby Surround sound from the TV’s speakers.

To turn on Dolby Virtual with SRS TruSurround:

1.Press MENU and open the AUDIO menu.

2.Highlight ADVANCED AUDIO SETTINGS and press

ENTER.

3.Press z to highlight DOLBY VIRTUAL SRS TruSurround, and then press • to select ON.

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To turn off Dolby Virtual with SRS TruSurround:

Select OFF in step 3 above.

Note: The Dolby Virtual with SRS TruSurround and SRS WOW 3D features cannot be on at the same time. If you set one to ON, the other will automatically be set to OFF.

Selecting the optical audio output format

Use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the OPTICAL AUDIO OUT jack on the TV (see “Connecting a digital audio system” on page 20).

To select the optical audio output format:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETUP and press ENTER.

3.Press z to highlight the OPTICAL OUTPUT FORMAT field, and then press • to select either DOLBY DIGITAL or PCM, depending on your device.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	81
HMX94(E)076-81(8b-UseTV)	81	10/25/04, 4:12 PM

(E) 46/52/62HMX94