Toshiba 52HMX94 owner manual Using the POP features, Using the POP double-window feature

Chapter 8: Using the TV’s features

Using the POP features

Using the POP double-window feature

The POP (picture-out-picture) double-window feature splits the screen into two windows so you can watch two programs at the same time.

To display a program in the POP window:

1.Select the program you want to watch in the main window.

2.Press SPLIT to open the POP window.

Note:

•When the main window is in the ANT1 or ANT2 mode, the ANT1 and ANT2 inputs cannot be selected for the POP window.

•When the main window is in Video 1/2/3, ColorStream HD1/HD2, or HDMI mode, those inputs cannot be selected for the POP window.

• You cannot view IEEE-1394 source programs in the POP window.

• You cannot view two video or two antenna sources

Main window
	ANT1	POP
	TV12	Video1

POP window

in both the main and POP windows simultaneously. (You can view a video source in one window and an antenna source in the other.)

Green border

(denotes active window)

3.Press • to highlight the POP window (will have a green border).

4.Press INPUT to open the Pop Input Selection window. Select the input source for the POP window by pressing the corresponding Number button (0–7). The current source displays in purple in the Pop Input Selection window.

To close the POP window and tune to the currently highlighted window:

Press ENTER after highlighting the window you want to view as a normal picture.

To close the POP window:

Press SPLIT or EXIT.

Notes about recording:

•When the POP window is open and you start recording, the POP window will close and recording will start.

•If you use the TV’s remote control to start recording, you will not be able to open the POP window. If you attempt to do so, the message “Not Available” will appear on-screen.

•It is recommended that you use the TV’s remote control to start recording. If you use a device other than the TV’s remote control to start recording, you may be able to open the POP window during the recording process. If this happens, the recorded audio will reflect the audio of the active window (main or POP), which may not be the audio you intended to record.

+10

–

ACTION 100 MENU

ENTER

Numbers

INPUT

SPLIT

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	73
HMX94(E)066-75(8a-UseTV)	73	9/28/04, 11:00 AM

(E) 46/52/62HM94