Chapter 6: Setting up your TV

Setting the AVHD device skip time

When you connect an external AVHD (audio/video hard drive) device, such as the Toshiba SymbioAVHD recorder (model 160HD4), to one of the TV’s IEEE-1394 ports, you can use the AVHD device skip time feature to set the number of minutes the device will skip forward or backward when you press the SKIP buttons.

Note:

This TV will work best with the Toshiba TM AVHD recorder (model 160HD4), for recording high definition and standard definition material from either tuner and for controlling live TV (pause/rewind/etc.). When the AVHD recorder is connected to the TV, the remote control keys (LIVE, STOP, REW, PAUSE, PLAY, etc.) are automatically activated to allow pausing of live TV.

If you connect a Toshiba TM AVHD recorder, you must set up the TV Guide On Screen system in order to use the Symbio’s full functionality. See Chapter 5 for details on setting up the TV Guide On Screen system. See pages 23 and 49 for further details about AVHD digital recorders.

When you connect an AVHD (or a D-VHS) device, the TV Guide On Screen system is automatically configured to allow recording. See page 23 for device connection information. See Chapters 5 and 7 for details about setting up and using the TV Guide On Screen system.

To set the AVHD device skip time:

1.Press MENU and open the SETUP menu.

2.Highlight AVHD SKIP TIME and press ENTER.

3.Press z or y to select the AVHD skip time and press

ENTER.

Setting the HDMIaudio mode

To select the HDMI audio mode:

1.Press MENU and open the SETUP menu.

2.Highlight HDMI AUDIO SELECTION and press

ENTER.

3.Press z or y to select which HDMI device for which

you want to select audio and press ENTER.

4.Press z or y to select the HDMI audio mode from Auto, Digital, or Analog. (Auto is recommended). See “Connecting an HDMI or a DVI device to the HDMI input” on page 19.

Setting the time and date

Note: If you already set up the TV Guide On Screen system, the time and date were set automatically and you can skip this step.

To set the time and date:

1.Press MENU and open the SETUP menu.

2.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below.)

3.Open the TIME AND DATE menu, highlight START SETUP, and press ENTER.

Time And Date

Start Setup

Navigate

 

Select

DVD RTN

Back

EXIT

Exit

 

CH RTN

If you have not set up the TV Guide On Screen system, the following screen will appear. To set the time, highlight TV GUIDE ON SCREEN and press ENTER. The TV Guide On Screen setup sequence will start, and the time and date will be set automatically.

Time And Date

Your TV Guide On Screen System can provide

accurate time and date information.

It is recommended you set up TV Guide On Screen

first and use it to obtain the time and date.

Manual

TV Guide On Screen

Cancel

Note:

If you highlight TV GUIDE ON SCREEN to set the time and date through the TV Guide On Screen system and a power outage occurs, the time and date will be updated automatically when the power is restored.

If you highlight MANUAL to set the time and date manually and a power outage occurs, you will lose the time and date settings when the power is restored.

If you manually set the time and date and then perform TV Guide On Screen system setup, the manual time and date settings will be overridden by the TV Guide On Screen system’s time and date settings.

 

 

Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

49

 

 

 

HMX94(E)044-51(6b-Setup)

49

9/27/04, 10:46 AM

 

(E) 46/52/62HM94

Page 49
Image 49
Toshiba 52HMX94 owner manual Setting the Hdmi audio mode, Setting the time and date, To set the Avhd device skip time