Toshiba 52HMX94 Selecting the lamp mode, To set the Cinema Mode to Film, To select the lamp mode

Chapter 8: Using the TV’s features

Selecting the cinema mode (480i signals only)

When you view a DVD (480i signal; 3:2 pulldown processed) from a DVD player connected to the ColorStream HD1/HD2 (component video) or HDMI inputs on the TV, smoother motion can be obtained by setting the CINEMA MODE to FILM.

To set the CINEMA MODE to FILM:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

3. In the CINEMA MODE field, select FILM.

4.To save your settings temporarily, highlight DONE and press ENTER.

To save your settings permanently, highlight SAVE and press ENTER.

To set the CINEMA MODE to VIDEO:

Select VIDEO in step 3 above.

Selecting the lamp mode

You can select either the HI BRIGHT or LOW POWER lamp mode.

•The HI BRIGHT mode is useful when additional picture brightness is desired (such as in a bright room).

•The LOW POWER mode reduces wear on the projection lamp. Using this mode should result in longer lamp life. See “Lamp unit replacement” on page 98–100.

To select the lamp mode:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

3.In the LAMP MODE field, select HI BRIGHT or LOW POWER, whichever you prefer.

4.To save your settings temporarily, highlight DONE and press ENTER.

To save your settings permanently, highlight SAVE and press ENTER.

72		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
HMX94(E)066-75(8a-UseTV)	72	9/28/04, 11:00 AM

(E) 46/52/62HM94