Toshiba 52HMX94 Connecting your TV, TV front touchpad and side panel controls and connections

2 Connecting your TV

TV front touchpad and side panel controls and connections

Front of TV

Remote sensor

1

Front touchpad*

	EXIT		zyx •		MENU
TV/VIDEO	3			4	5	POWER
2						6
TV/VIDEO	EXIT	CHANNEL		VOLUME	MENU	POWER
		Channel zy		Volume x •	Green/Red LEDs
		7		8		9

*Gently touch the printed keys on the touchpad.

Side panel

Reset button

0

Right side of TV

{ {
VIDEO-3 IN	Memory card
!¡	slots
	!™

1Remote sensor (behind the screen) — Point the remote

control toward this area of the TV screen. See “Remote control effective range” on page 26.

2TV/VIDEO — Repeatedly press to change the source you are viewing (ANT 1, ANT 2, VIDEO 1, VIDEO 2, VIDEO 3, HDMI 1, HDMI 2, ColorStream HD1, ColorStream HD2).

3EXIT — Press to close an on-screen menu instantly.

4ARROWS zyx • — When a menu is on-screen, these buttons function as down/up/left/right menu navigation buttons.

5MENU — Press to access the menu system (see page 34). When a menu is on-screen or the TV Guide On Screen program guide is open, this button functions as the ENTER button.

6POWER — Press to turn the TV on and off.

7CHANNEL yz — When no menu is on-screen, these buttons change the channel (programmed channels only; see page 41). When a menu is on-screen, these buttons function as up/down menu navigation buttons.

8VOLUME x • — When no menu is on-screen, these buttons adjust the volume level. When a menu is on-screen, these buttons function as left/right menu navigation buttons.

9Green and Red LEDs — When green lights solid (not blinking), it indicates that the TV power cord is plugged in

and the power is OFF. This is called standby mode.

Note: When you first plug in the power cord, the green LED will blink 3 times. After approximately 30 seconds, the green LED will light continuously, at which point you can press POWER to turn ON the TV.

When red lights solid (not blinking), it indicates that the TV power cord is plugged in and the POWER is ON.

See “LED indications” on page 94 for additional information.

0RESET — If the TV stops responding to the controls on the remote control or TV front panel and you cannot turn

the TV off or on, press this button to reset the TV.

Note: The RESET button is recessed, so you will need to use the end of a paper clip or similar object to press the button.

!¡ VIDEO-3— The side panel A/V connections are referred to as “VIDEO 3” and include standard A/V connections plus optional S-video. (The VIDEO 1 and VIDEO 2 A/V connections are on the TV’s back panel; see page 10.)

!™ Memory card slots — Insert a memory card into one of the memory card slots to view JPEG files (such as photos) as a “slide show” on your TV or listen to MP3 audio files (see page 82).

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	9
HMX94(E)009-11(2A-Cnct)	9	9/28/04, 10:21 AM

(E) 46/52/62HM94