Toshiba 52HMX94 Installing the remote control batteries, To install the remote control batteries

Chapter 3: Using the remote control

Installing the remote control batteries

To install the remote control batteries:

CAUTION: Always dispose of batteries in a designated disposal location. Never throw batteries into a fire.

1. Slide the battery cover off the back of the remote control.

2.Install two “AA” size alkaline batteries. Match the + and – symbols on the batteries to the symbols on the battery compartment.

Note:

•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

•Never mix battery types or use new and used batteries in combination.

•When necessary to replace batteries in the remote control, always replace both batteries with new ones.

•Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

3. Slide the battery cover on to the remote control until the lock snaps.

Using the remote control MODE button to control your other devices

Your TV remote control has one dedicated TV mode and five programmable multi-brand modes: CBL/SAT, VCR/PVR, DVD, AUDIO 1, and AUDIO 2. The default device modes and programmable device modes are listed below.

Note: The TV remote control is preprogrammed to operate most Toshiba devices. If you own a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you will need to program the remote control. See “Programming the remote control to operate your other devices” on page 30.

MODE	Default device mode control (before programming)
1) TV	Toshiba TV
2) CBL/SAT	Toshiba Satellite receiver
3) VCR/PVR	Toshiba VCR
4) DVD	Toshiba DVD
5) AUDIO 1	Pioneer Audio receiver
6) AUDIO 2	Pioneer LD

MODE	Device mode control after programming
1) TV	Toshiba TV
2) CBL/SAT
3) VCR/PVR
4) DVD	Multi-brand video/audio devices
5) AUDIO 1
6) AUDIO 2

You can directly select the device mode by pressing the corresponding number button (1-6) while pressing the MODE button.

Number (1-6)

MODE

+10

–

ACTION 100 MENU

ENTER

Note:

Although your new TV’s remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TV’s remote control to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	27
HMX94(E)026-33(3-RC)	27	9/28/04, 10:33 AM

(E) 46/52/62HM94