Toshiba 52HMX94 owner manual Setup / Installation menu layout, Navigating the menu system

*The MENU button on the TV front touchpad functions as the ENTER button when a menu is on-screen.

Chapter 4: Menu layout and navigation

Setup / Installation menu layout (continued)

To open the INSTALLATION menu (illustrated below): press MENU on the remote control or TV front panel, open the SETUP menu, select INSTALLATION, and press ENTER.

MENU / Setup / Installation

➞ Input Configuration ➞ [ Input Configuration window ]

Terrestrial ➞ Channel Program ➞ ANT1 }

➞ ANT2

➞ [ Scan for new channels on selected antenna ]

Devices

➞ Channel Add/Delete ➞ [ Terrestrial Channel Add/Delete window ] ➞ Signal Meter ➞ [ Signal Meter window ]

➞ IEEE-1394 Devices ➞ [ IEEE-1394 Device Management window ]

➞TheaterNet Devices ➞ [ TheaterNet Device Setup window ]

TV Guide On Screen Setup ➞ Start ➞ [ Start TV Guide On Screen setup ]

Time and Date ➞ Start Setup ➞ [ Time and Date Setup window ]

System Status ➞ System Information ➞ [ System Information window ]

Navigating the menu system

You can use the buttons on the remote
	TV front touchpad
control or TV front touchpad to access and
navigate your TV’s on-screen menu system.
• Press MENU to open the menu
	TV/VIDEO EXIT		CHANNEL			VOLUME			MENU	POWER
system.
• Use the up/down/left/right arrow
		EXIT x		•	z		y MENU
buttons (yzx •) on the remote
control or TV front panel to move in								(ENTER*)
the corresponding direction in a menu.

• Press ENTER to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.)

•All menus close automatically if you do not make a selection within 60 seconds, except the signal meter menu, which closes automatically after 5 minutes.

•To close a menu instantly, press EXIT.

Remote control

+10

–

ACTION 100

MENU MENU

ENTER

y

ENTER x •

z

EXIT

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	35
HMX94(E)034-35(4-Menus)	35	9/28/04, 10:37 AM

(E) 46/52/62HM94