3 Press on the projector to
INPUT
select the INPUT mode.
Note
•When a signal is not received, “Searching” will be displayed.
About the INPUT modes
Use this option to select | ||
the | ||
| ||
|
| |
| Use this option to select | |
Video | the composite video input | |
| source. | |
|
| |
Component | Use this option to select a | |
YPbPr, SDTV, or HDTV | ||
1&2 | ||
component input source. | ||
| ||
|
| |
DVI | Use this option to select | |
the DVI input source. | ||
| ||
|
| |
| Use this option to select | |
PC | the computer as an input | |
| source. | |
|
|
Note
•If you select “Auto” as the input source, then the correct input source is selected automatically.
Power button
|
| MENU button |
|
| T, S, W, X |
EXIT button |
| buttons |
| Component 1 | |
| COMPONENT 1 | |
Component 2 |
| |
COMPONENT 2 | button | |
button | DVI/PC | Video/ |
|
| |
DVI/PC button |
|
INPUT button
INPUT
ENTER
STATUS |
EXIT | MENU |
ECO | INPUT |
Basic Operation
4 Press | on the remote control | Main Menu |
or on the projector, then press
Enter to turn off the projector, when the confirmation message is displayed.
Note
•If you accidentally press power and do not want to turn off the projector, press Exit button or wait until the confirmation message disappears.
Info
•Do not unplug the power cord during projection or cooling fan operation. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.
27