Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “Standard”, “LetterBox”, “Anamorphic” or “Pixel to Pixel” image.
Switching the Picture Display Using
Different input signals
Easy to Use Functions
Press 
on remote or 
on keypad and select layout.
•Each time 
is pressed, the display changes as shown on page 41 and 42.
Info
•In the Pixel to Pixel Mode, images are displayed in the original resolution, and will not be scaled.
Aspect Ratio Function
The layout menu enables you to control how the projector resizes the input image.
The following option are available:
Anamorphic
•Resolution 1024x576
•4:3 input is stretched to fit 16:9 display
•Stretches entire image.
Pixel to Pixel
•Maintains input signal resolution. May have black borders around image.
Standard
•Resolution depends on the Input Signal
•4:3 input scaled to fit display height
•Width scaled to maintain 4:3 aspect ratio
•Black bars on left and right (taking up 25% of the whole display)
LetterBox
•Resolution 1024x576
•4:3 input scaled to fit display width
•Height scaled to maintain 4:3 aspect ratio: 1024x768
•25% of the entire image on the top and bottom is cropped.
COMPONENT 1
COMPONENT 2
DVI/PC
Aspect Ratio
Main Menu
40
