Bradford-White Corp BMT2H, BMT2V warranty Warranty, Dimensions, Locating the Appliance, Clearances

Page 4 BRADFORD WHITE CORP.

9Fuel

N = Natural Gas P = Propane

10Altitude

A = 0–10,000 feet

11Location

C = Indoor and Outdoor

12Firing Mode K = Two-stage

13Revision

1 = First version of design

14Heat Exchanger

B = Glass-lined cast iron / copper / bronze trim

(std. on BMT2V)

C = Glass-lined cast iron / copper

(std. on BMT2H)

K = Bronze / copper

N = Glass-lined cast iron / cupro-nickel

(n/a on water heaters)

P = Glass-lined cast iron / cu-nickel / bronze trim S = Bronze / cupro-nickel

15Option Code

X = Standard unit

J = CSD-1, FM, IRI, IL

16Pump Options

H = Pump mounted BMT2V, hard water pump N = Pump mounted (any), normal water pump

1.3 Warranty

Bradford White’s appliances are covered by a limited warranty. Owners should submit online warranty registration at www.branfordwhite.com.

All warranty claims must be made to an authorized Bradford White representative or directly to Customer Service. Claims must include the serial number and model (this information can be found on the rating plate), installation date, and name of the installer. Shipping costs are not included in the warranty coverage.

Some accessory items are shipped in separate packages. Verify receipt of all packages listed on the packing slip. Inspect everything for damage immediately upon delivery, and advise the carrier of any shortages or damage. Any such claims should be filed with the carrier. The carrier, not the shipper, is responsible for shortages and damage to the shipment whether visible or concealed.

1.4Dimensions

See Figures 1 and 2.

1.5Locating the Appliance

The appliance should be located to provide clearances on all sides for maintenance and inspection. It should not be located in an area where leakage of any connections will result in damage to the area adjacent to

the appliance or to lower floors of the structure. When such a location is not available, it is

recommended that a suitable drain pan, adequately drained, be installed under the appliance.

The appliance is design certified by CSA- International for installation on combustible flooring; in basements; in closets, utility rooms or alcoves. Brute

Deluxe Boilers or Water Heaters must never be installed on carpeting. The location for the appliance should be chosen with regard to the vent pipe lengths and external plumbing. The unit shall be installed such that the gas ignition system components are protected from water (dripping, spraying, rain, etc.) during operation and service (circulator replacement, control replacement, etc.). When vented vertically, the Brute Deluxe must be located as close as practical to a chimney or outside wall. If the vent terminal and/or combustion air terminal terminate through a wall, and there is potential for snow accumulation in the local area, both terminals should be installed at an appropriate level above grade.

The dimensions and requirements that are shown in Table 1 should be met when choosing the locations for the appliance.

1.6Locating Pump-Mounted Water Heater with Respect to Storage Tank(s)

For best results, a pump-mounted Brute Deluxe water heater should be located within 15 feet (4.6m) of the storage tank(s). The pump is sized for 30 feet (9.1m) of piping.

If the appliance must be installed with longer piping runs, then larger diameter pipe or tubing shall be used. Consult the factory for assistance.

1.7Locating Pump-Mounted Boiler with Respect to Return/Supply Header

For the best results, a pump-mounted Brute Deluxe

	REQUIRED			RECOMMENDED
APPLIANCE	CLEARANCE FROM			SERVICE ACCESS
SURFACE	COMBUSTIBLE MATERIAL			CLEARANCE
	inches	cm		inches	cm
Left Side	1	2.5	24		61
Right Side	1	2.5	24		61
Top	1	2.5	12		30
Back	1	2.5	**12**		30**
Front	1	2.5	36		91
Vertical
(Category 1)	6*	15.2*
Vent
Horizontal	per UL1738 venting
(Category 3)	system supplier’s
Vent	instructions

*1" (2.5cm) when b-vent is used.

**When vent and/or combustion air connects to the back, recommended clearance is 36" (91cm).

Table 1. Clearances.