Ahumador Numérico® Bradley Interior
G
B
I
A
J
F
C
D
H
| E |
Lista de Partes Interiores | |
|
|
A- Bandeja de Goteo | F- Elemento Calentador |
B- Parrillas de Cocinado (4 o 6) | G- Bisagra Superior de la Puerta |
C- Bandeja Rectangular del Fondo | H- Bisagra Inferior de la Puerta |
E- Quemador de Bisquettes | I- Perno de Latón |
(Bisquettes no incluidos) | J- Aislador de Porcelana |
General Maintenance
Important Safety Precautions
•Bradley Smoker must be maintained and cleaned after each use.
•Unplug the Power Supply Cord (3) prior to commencement of any maintenance or cleaning.
•Do not immerse smoker in water.
•Do not spray inside of smoker with any kind of appliance cleaner.
•Do not use aluminum foil inside the smoker.
•Do not leave unattended when in use.
•Do not spray or clean the smoker with excessive amounts of water.
Maintenance Procedures
•Clean out the Drip Bowl. Dispose of all burnt Bisquettes carefully as they may still be hot.
•Wash the Drip Tray, Racks, Bottom Rectangular Tray and Drip Bowl with hot water and detergent, or put them in the dishwasher.
•Remove food particles and grease residue from the smoker. If the inside needs cleaning, wipe it with a damp cloth.
Note: The tower should have smoke or black residue on the inside. The more residue, the better the product will taste.
•The Digital Smoke Generator should be kept clean and free of wood chips and grease at all times. If loose wood chips have collected in the Smoke Generator, simply blow or vacuum these particles away. Unplug the Power Supply Cord (3), Jumper Cord (2), and the Sensor Cable (1) before removing the Smoke Generator from the Smoke Tower. Refer to “Remove Smoke Generator” in “Assembly Instructions”.
•The Bisquette Burner should be lightly scraped using a wire brush or scraper to remove any residue that has been left by the burning process.
•Clean the Damper (at the top of the smoker) to ensure it is not stuck.
•Wipe the Door Seal with warm water to remove any leftover residues and food particles.
After Cleaning
•Replace Racks, Drip Tray, Bottom Rectangular Tray and Drip Bowl into the smoker, making sure all parts are clean and dry.
•Insert the Smoke Generator back into the smoker tower.
•Make sure the Power Supply Cord (3) is unplugged.
34 | 11 |
