Aerada 1000 Series Gooseneck Faucet | Installation Instructions |
Troubleshooting continued . . .
Problem
Check
Possible Solution
Faucet works in reverse. | Solenoid wiring on DIN connector | Replace solenoid. | |
| (no beeps). |
| |
|
|
| |
Faucet turns off too soon. | Faucet operating mode (no beeps) or | Change mode or range setting using DIPswitch (page 6). | |
| faucet range setting. |
| |
|
|
| |
Faucet stays on longer than | Dirty solenoid valve (no beeps). | Clean internal parts or replace solenoid valve. | |
normal. |
|
| |
Clogged spout outlet. | Clean outlet. | ||
| |||
|
|
| |
| Faucet in wrong mode (no beeps). | Change mode setting using DIPswitch (page 6). | |
|
|
| |
Faucet stopped working. | Mounting of electronics cover (no beeps). | Electronics cover must be mounted to allow for drip loops | |
|
| for the sensor and solenoid cables (pages 4 & 5). | |
|
|
| |
| Sensor cable connector. | Clean connector. | |
|
|
| |
| No clicking sound from solenoid during | Reset electronics using reset button (page 6). | |
| hand presence (no beeps). |
| |
|
|
| |
| Solenoid valve strainer. | Clogged strainer. Clean if necessary. | |
|
|
| |
| Check if faucet outlet is clogged | Clean faucet outlet. | |
| (no beeps). |
| |
|
|
| |
| Battery voltage (battery operated only). | Replace batteries if below 4.2 volts. | |
|
|
| |
| Incorrect range setting for spout type and | Change range setting using DIPswitch (page 6). | |
| sink used (no beeps). |
| |
|
|
| |
|
|
|
8 | 9/23/04 | Bradley Corporation • |
