Bradley Smoker SS-3/AST/JUV, SS-3/AST/STD installation instructions Completing installation

Models: SS-3/AST/JUV SS-3/AST/STD

1 19

Page 11

	Express® Lavatory System SS-Series
Installation Instructions - For Service Only	SS-3/AST/STD, SS-3/AST/JUV

1.Turn on the water supply to the Express® and check for leaks.

2.Install the panel to the frame. Fasten panel with the ten Torx-head screws provided (see Figure 7 below).

FRAME

(10) TORX-HEAD SCREW

PANEL

Figure 7

Bradley Corporation • 215-1238 Rev. C; EN 03-813

5/11/04

Image 11

Contents

Standard and Juvenile Height Table of ContentsBarrier-free and ADA compliant juvenile height mounting Pre-Installation InformationSupplies required for installation Barrier-free and ADA compliant standard height mountingDimensions continue Juvenile Height Standard HeightRough Installation InstructionsInstallation Instructions continue SS-3/AST/STD Express Lavatory System Standard HeightSS-3/AST/JUV Express Lavatory System Juvenile Height Mounting frame to wall Do not overtighten Connecting supply Connecting plastic tubing Completing installation Panel cleaning Cleaning and Maintenance InstructionsTerreon and panel maintenance CleaningFill soap dispensers Soap Dispenser MaintenanceIf water sprayhead delivers all hot or cold water Check Valve TroubleshootingCleaning Instructions If water just dribbles or does not flow from sprayheadOptional Stop/Strainer/Check Valve Assembly of ComponentsPaneling Drain Assembly Other Replacement PartsPushbutton assembly Problem Water is dripping from the streamformers Metering Air Valve MaintenanceMetering Air Valve Troubleshooting Metering Air Valve Repair Kits and Parts ListProblem Pushbutton does not work properly Problem Valve will not shut offProblem Valve will not turn on Problem Timing can not be adjusted for more than 5 secondsService Suggestions Vernatherm Mixing Valve Maintenance and ServiceMaintenance Instructions